Category Archives: GHz_Bands

Enhanced USB-to-Serial PTT Interface

Posted on March 1, 2020 by g4hsk

Many of the modern transceivers today support direct USB connectivity to your shack PC. This USB connection typically enables 2-way audio and CAT control allowing more or less full control of the transceiver, including PTT keying. Where CAT control for … Continue reading →

Posted in 23cms, 3cms, 70cms, Anglian TVTR, Blog, EME, GHz_Bands, QO-100, Satellites | Leave a comment

An Arduino Based Four Event Sequencer

Posted on February 24, 2020 by g4hsk

When putting together a system using RF switching relays, Low Noise Amplifiers (LNA) and RF power it’s important that things are switched at the right time and in the correct sequence. This ensures that the relays do not actually switch … Continue reading →

Posted in Arduino, Blog, GHz_Bands | Leave a comment

QO-100 Experiments – 2400MHz Pipe-Cap Filter

Posted on January 4, 2020 by g4hsk

Over the years I’d seen a number of projects that were using one or more pipe-cap filters. They looked as if they should be fairly simple to make so I thought I should try one to help reduce the unwanted … Continue reading →

Posted in Blog, GHz_Bands, QO-100, Satellites | Leave a comment

QO-100 Experiments – 2256MHz Local Oscillator

Posted on January 4, 2020 by g4hsk

I chose to use an ADF4351 based synthesizer module to generate the 2256MHz local oscillator (LO) needed for my QO-100 QRP  transmit converter. This is controlled by an Arduino Nano. Having already used one of these modules for the 54 … Continue reading →

Posted in Blog, GHz_Bands, QO-100, Satellites | Leave a comment

QO-100 Experiments – QRP Transmit Converter

Posted on January 3, 2020 by g4hsk

Having spent some time listening to the QO-100 satellite using the Goonhilly WebSDR facility and my own temporary receive solutions, I decided it was time to try generating some RF and get a signal up to the satellite. I was … Continue reading →

Posted in Blog, GHz_Bands, QO-100, Satellites | Leave a comment

Fun on 10GHz – 2 ‘Rain-Scatter’

Posted on October 7, 2019 by g4hsk

I’m still what some might call a novice when it comes to the 10GHz band. It’s a band that’s like no other that I’ve operated on, and I’m hooked on it. I’ve recently discovered first-hand the effect of rain-scatter at … Continue reading →

Posted in 3cms, Blog, GHz_Bands, Mobile / portable Operation | Leave a comment

Fun on 10GHz – 1

Posted on August 13, 2019 by g4hsk

Over the last 20 years or so I’ve rarely operated my radio equipment away from home. This has changed since I’ve caught the “microwave bug” and got started on the 10GHz band. My 10GHz setup comprised initially of just a … Continue reading →

Posted in 3cms, Blog, EME, GHz_Bands | Leave a comment

10GHz – Frequency Accuracy and Stability

Posted on May 27, 2019 by g4hsk

One of the key things that I have learnt from my EME activities is that frequency accuracy and stability is very important. My current 10GHz equipment comprises of a DB6NT G4 Transverter (TVTR) and an ICOM IC-706 transceiver for the … Continue reading →

Posted in 3cms, Blog, GHz_Bands | Leave a comment

A ProgRock and a very old MMT 144/28 Transverter

Posted on May 2, 2018 by g4hsk

Having got the 10MHz side of the ProgRock project working (see here for details) the next stage was to look at the 116MHz output. If this was also acceptable, I would have an alternative means of generating the two frequencies … Continue reading →

Posted in 23cms, Blog, EME, GHz_Bands | Tagged , | Leave a comment

23cms VLNA Finally Installed at the Masthead

Posted on June 15, 2017 by g4hsk

It’s been a long slow process but today I finally finished installing the G4DDK 23cms VLNA at the masthead. The extended timeline was partly due to some other improvements that needed to be done to the 2m EME setup and … Continue reading →

Posted in 23cms, Blog, EME, GHz_Bands | Leave a comment