Pages
Categories
Archives
- February 2021
- January 2021
- October 2020
- July 2020
- March 2020
- February 2020
- January 2020
- October 2019
- August 2019
- May 2019
- November 2018
- July 2018
- June 2018
- May 2018
- March 2018
- February 2018
- January 2018
- July 2017
- June 2017
- May 2017
- April 2017
- March 2017
- January 2017
- November 2016
- June 2016
- March 2016
- December 2015
- June 2015
- April 2015
- June 2014
- December 2013
- November 2013
- July 2013
- January 2013
- October 2012
- September 2012
Twitter Updates
- @g7soz I didn't know you can buy new end-plates. Thanks for sharing. 1 month ago
- @lex_ph2lb It’s based on the “Simple RF Power Reference” design by W1GHZ and uses a Qantek, 50 MHz HCMOS oscillator. 1 month ago
- @JohaPrime The design is by PA0RWE and I’m using the MCP1501-20 device. 1 month ago
- @g7soz 👍👍 I’ve used them on a few projects. The internal grooves on the side walls can on occasions cause me grief… twitter.com/i/web/status/1… 1 month ago
- Metal bashing done (not my favourite part of a project.) My AD8317 / Arduino based power meter project with 50MHz 0… twitter.com/i/web/status/1… 1 month ago
Meta
Monthly Archives: October 2012
2 x 8 ele I0JXX
Having had excellent results with a single yagi I wanted to add an additional antenna to get some extra gain on both TX and RX. I originally planned on using a second 9 ele DK7ZB but changed my mind when … Continue reading
Posted in 2M, Blog
Leave a comment
IC-735
I purchased the IC-735 back in the 80’s, it has always been a favourite rig of mine and has spent most of its life as the prime mover for my 50, 144 and 432 Mhz transverters. I retired the rig … Continue reading
Posted in Blog, IC-735
Leave a comment
9 Element DK7ZB
I built this antenna using 1/2 inch diameter tubing for the elements and 1 x 1 inch square tube for the 5M long boom. The photos below were taken at various stages of construction. The driven element was constructed using the following … Continue reading
Posted in 2M, Blog, EME
Leave a comment