Pages
Categories
Archives
- February 2021
- January 2021
- October 2020
- July 2020
- March 2020
- February 2020
- January 2020
- October 2019
- August 2019
- May 2019
- November 2018
- July 2018
- June 2018
- May 2018
- March 2018
- February 2018
- January 2018
- July 2017
- June 2017
- May 2017
- April 2017
- March 2017
- January 2017
- November 2016
- June 2016
- March 2016
- December 2015
- June 2015
- April 2015
- June 2014
- December 2013
- November 2013
- July 2013
- January 2013
- October 2012
- September 2012
Twitter Updates
- RT @doismellburning: Amplifier and filter set up, currently using a spare Yagi from @G8GKA but no Norbi packets received yet - anyone got a… 1 month ago
- @doismellburning @blu3id @MattStibbs If both ends of the cable are disconnected, you could check for continuity / r… twitter.com/i/web/status/1… 1 month ago
- @g7soz I didn't know you can buy new end-plates. Thanks for sharing. 3 months ago
- @lex_ph2lb It’s based on the “Simple RF Power Reference” design by W1GHZ and uses a Qantek, 50 MHz HCMOS oscillator. 3 months ago
- @JohaPrime The design is by PA0RWE and I’m using the MCP1501-20 device. 3 months ago
Meta
Monthly Archives: June 2017
23cms VLNA Finally Installed at the Masthead
It’s been a long slow process but today I finally finished installing the G4DDK 23cms VLNA at the masthead. The extended timeline was partly due to some other improvements that needed to be done to the 2m EME setup and … Continue reading
Posted in 23cms, Blog, EME, GHz_Bands
Leave a comment
23cms EME
The challenge to try EME on another band was made much easier when I heard about the SG-Lab TR1300 transverter. I could see that this could be fairly easily integrated into my existing 2m setup. Things have and continue to … Continue reading
Posted in 23cms, Blog, EME, GHz_Bands
Leave a comment
