Pages
Categories
Archives
- February 2021
- January 2021
- October 2020
- July 2020
- March 2020
- February 2020
- January 2020
- October 2019
- August 2019
- May 2019
- November 2018
- July 2018
- June 2018
- May 2018
- March 2018
- February 2018
- January 2018
- July 2017
- June 2017
- May 2017
- April 2017
- March 2017
- January 2017
- November 2016
- June 2016
- March 2016
- December 2015
- June 2015
- April 2015
- June 2014
- December 2013
- November 2013
- July 2013
- January 2013
- October 2012
- September 2012
Twitter Updates
- RT @doismellburning: Amplifier and filter set up, currently using a spare Yagi from @G8GKA but no Norbi packets received yet - anyone got a… 1 month ago
- @doismellburning @blu3id @MattStibbs If both ends of the cable are disconnected, you could check for continuity / r… twitter.com/i/web/status/1… 1 month ago
- @g7soz I didn't know you can buy new end-plates. Thanks for sharing. 3 months ago
- @lex_ph2lb It’s based on the “Simple RF Power Reference” design by W1GHZ and uses a Qantek, 50 MHz HCMOS oscillator. 3 months ago
- @JohaPrime The design is by PA0RWE and I’m using the MCP1501-20 device. 3 months ago
Meta
Monthly Archives: May 2018
Revisiting the LDF4-50 MagLoop
Today I decided to enjoy the fine weather and do some further outdoor tests with the LDF4-50 MagLoop. I constructed this loop last year. Up until now this loop hasn’t really been used, all my MagLoop experiments have been done … Continue reading
A ProgRock and a very old MMT 144/28 Transverter
Having got the 10MHz side of the ProgRock project working (see here for details) the next stage was to look at the 116MHz output. If this was also acceptable, I would have an alternative means of generating the two frequencies … Continue reading
