Pages
Categories
Archives
- June 2022
- March 2022
- February 2022
- October 2021
- February 2021
- January 2021
- October 2020
- July 2020
- March 2020
- February 2020
- January 2020
- October 2019
- August 2019
- May 2019
- November 2018
- July 2018
- June 2018
- May 2018
- March 2018
- February 2018
- January 2018
- July 2017
- June 2017
- May 2017
- April 2017
- March 2017
- January 2017
- November 2016
- June 2016
- March 2016
- December 2015
- June 2015
- April 2015
- June 2014
- December 2013
- November 2013
- July 2013
- January 2013
- October 2012
- September 2012
Twitter Updates
- Nice RS on 10GHz now. GB3LEX S9+ in JO01fs. Good to also see GB3SEE at S6, not copied here for a long time.… twitter.com/i/web/status/1… 1 month ago
- RT @radioemmatoc: Happy 2MT Day! Happy Birthday 2MT! 100yrs old! - Join me from 11am for our little tribute to this pioneering station. 'Li… 4 months ago
- I've finally modified my Yaesu G-650C controller. It has an extra socket fitted and can now connect to the shack PC… twitter.com/i/web/status/1… 6 months ago
- Fun build yesterday. A 437MHz Eggbeater for @doismellburning Top cap and ground reflector still to do. It will be… twitter.com/i/web/status/1… 8 months ago
- @doismellburning That was a special contact. Look forward to many more, maybe even on SSB or CW one day. 😉 8 months ago
Meta
Category Archives: Anglian TVTR
QO-100 Experiments – New Down-converter
Probably like most people starting out with QO-100 operation I initially used the Goonhilly QO-100 WebSDR to listen to the satellite down-link. This inspired me to experiment with an LNB, a 65cm offset dish, and a NooElec SDR module with … Continue reading
Posted in 3cms, ADF4351, Anglian TVTR, Arduino, Blog, EME, GHz_Bands, QO-100, Satellites
Leave a comment
Enhanced USB-to-Serial PTT Interface
Many of the modern transceivers today support direct USB connectivity to your shack PC. This USB connection typically enables 2-way audio and CAT control allowing more or less full control of the transceiver, including PTT keying. Where CAT control for … Continue reading
Posted in 23cms, 3cms, 70cms, Anglian TVTR, Blog, EME, GHz_Bands, QO-100, Satellites
Leave a comment
Anglian TVTR Drive Control
It’s been a while since I’ve posted any updates. Lots of little changes have been happening on the 2m front, with hopefully each change making a slight improvement to the overall working of my small (by EME standards) system. I … Continue reading
Posted in Anglian TVTR, Blog
Leave a comment
ZLPLL
I built my 2m transverter with the intention of using it primarily for EME (JT65), driving either my 2m PA or at some point in the future as the IF for one or more microwave transverters. To ensure that I … Continue reading
Posted in 23cms, 2M, 3cms, Anglian TVTR, Blog, EME, GHz_Bands, QRSS / WSPR / QRP
Leave a comment
Anglian 144MHz Transverter
Having moved away from various VHF / UHF transverters and used the TS-2000 and FT-847 “shack-in-the-box” 160m <> 70cms transceivers for many years, with both giving excellent results, it seemed at first a strange decision to embark on a project … Continue reading
Posted in 2M, Anglian TVTR, Blog
Leave a comment